You are here: Home / Products / Adhesives

Our Adhesives

The heart of the Weld Mount System is our acrylic adhesives which have been specifically formulated to be used with our parts. They are high strength/high viscosity methacrylates with incredible strength in both tensile and in shear. We have a range of different adhesives depending upon your application requirements. Be sure and watch the site videos for further technical details on each adhesive as well as installation instructions.

  • Tube of 2010 Acrylic Adhesive

    AT-2010 Acrylic Adhesive

    AT-2010 is our biggest seller and is a unique adhesive. It has high viscosity and will hold smaller parts without sagging. Heavier parts may need our AT-690 fixture dots to hold parts in place while the adhesive kicks. AT-2010 cures in 5 - 6 minutes, has a 4 minute working time and develops working strength in 15 -20 minutes. This makes AT-2010 the ideal adhesive for applications which require an immediate high strength bond. AT-2010 has a 6 month shelf life when stored at 72 degrees. We recommend that where ever possible this adhesive be refrigerated. Packaged in a 50ml cartridge and can be mixed by hand or by using our AT-300 gun and mixing tips. The 50ml cartridge will bond 150 – 200 parts.

    See Our Video About AT-2010
    AT-2010 Technical Data Sheet
    AT-2010 GHS Sheets
    How To Use AT-2010
  • Tube of 4020 Acrylic Adhesive

    AT-4020 Acrylic Adhesive

    AT-4020 is a specially formulated adhesive for holding all our parts with little or no sagging in vertical or overhead applications. Cures in 10 - 12 minutes and has working strength within 40 minutes. AT-4020 is recommended for composite and plastic bonding applications and not for bonding to metal substrates. Unlike other 2 part acrylic adhesives AT-4020 has a one year shelf life when stored at 72 degrees but is best refrigerated when ever possible. It is packaged in a 50ml cartridge and can be mixed by hand or by using our AT-300 gun and mixing tips. The 50ml cartridge will bond 150 –200 parts.

    See Our Video About AT-4020
    AT-4020 Technical Data Sheet
    AT-4020 GHS Sheets
    How To Use AT-4020
  • Tube of 6030 Acrylic Adhesive

    AT-6030 Acrylic Adhesive

    AT-6030 is a 10 to 1 metal bonding adhesive. It has high viscosity and cures in 10 - 12 minutes, has a 6 minute working time and develops working strength in 40 minutes. AT-6030 develops in excess of 2,500 lbs (psi) tensile strength on most metal surfaces making it an ideal alternative to welding in many applications. AT-6030 has a 6 month shelf life and should always be stored refrigerated. Packaged in a 38ml cartridge this adhesive must be used with our AT-300 gun, AT-12 plunger and and AT-650 mixing tips. The 38ml cartridge will bond 80 – 120 parts.

    See Our Video About AT-6030
    AT-6030 Technical Data Sheet
    AT-6030 GHS Sheets
    How To Use AT-6030
  • Tube of 1030 Acrylic Adhesive

    AT-1030 Acrylic Adhesive

    AT-1030 is a good general purpose adhesive packaged in a manual plunger cartridge. Simply snip off the two end caps and dispense the needed amount of adhesive onto a clean surface and mix it by hand. AT-1030 cures in 10 - 12 minutes, has a 6 minute working time and develops working strength in 40 minutes. AT-1030 has a 12 month shelf life when stored at 72 degrees. We recommend that where ever possible this adhesive be refrigerated. Packaged in a 30ml cartridge this adhesive does not require the adhesive gun or mixing tips. The 30ml cartridge will bond 30 – 50 parts.

    See Our Video About AT-1030
    AT-1030 Technical Data Sheet
    AT-1030 GHS Sheets
  • Tube of 8040 No Slide Metal Composite Bonder

    AT-8040 No Slide Multi-Bonder

    Weld Mount AT-8040 is a solvent free, VOC Compliant, two part methacrylate-based, structural adhesive formulated to bond metals for use in severe environments. It will also bond engineered thermo- and thermosetting plastics, composites to metals or various substrate combinations. It has excellent adhesion to as received metal surfaces including aluminum, stainless steel, galvanized steel, and plated steels. AT-8040 forms a tough, high strength bonds usually with minimal surface preparation developing handling strength in 12 minutes and a functional cure within 45 minutes. Ultimate strength exceeds 3500 psi of tensile shear strength on aluminum with remarkable impact and peel strengths. AT-8040 will hold all Weld Mount parts on a vertical or overhead surface without sagging when properly used.

    See Our Video About AT-8040
    AT-8040 Technical Data Sheet
    AT-8040 Installation Sheet
    AT-8040 GHS Sheets
    How To Use AT-8040
  • Dispensing Gun for Tube Adhesives

    AT-300 Adhesive Dispensing Gun

    The AT-300 Adhesive dispensing gun has a 1:1 plunger for use with AT-2010 and AT-4020 50ml cartridges. When using AT-6030 adhesive it requires AT-12 (10 to 1 plunger). Replacement plungers are also available.

  • Mixing Tip for Special Tube Adhesives

    AT-650 3.5" Adhesive Mixing Tip for AT-6030 and AT-4020

    The 3.25” AT-650 mixing tip is for use with AT-6030 and AT-4020. The 3.25 inch significantly reduces waste over the traditional 6 inch tip. Each package contains 10 mixing tips.

  • Mixing Tip for Adhesive

    AT-850 Mixing Tip for AT-2010 and AT-8040

    The NEW at-850 tip is for use with AT-2010 and AT-8040. It’s unique design eliminates any possibility of the cartridge plugging up as the entry is separated.

Weld Mount Systems © 2009
^ Back to Top