You are here: Home / Products / System Kits

Our System Kits

Weld Mount System has created several Kits with commonly used parts, or we can even create a Custom Kit if you would like. Each kit contains a wide range of parts,adhesives and adhesive dispensing gun* for you to try the Weld Mount System first hand. We sell this kit at our cost as an incentive for you to try our system and because we are sure you'll want to continue to use the Weld Mount System..

  • AT-1050 Retail Wire Tie Kit

    The AT-1050 kit contains one manual mix tube of AT-1030 adhesive and 25 pc of AT-5 white wire tie mount. Just enough parts for a small wiring job and ideal introduction to Weld Mount.

    This Kit Contains:

    30 ML Tube AT-1030 Adhesive
    25 Pieces AT-5 White Tie Mount
    2 Mixing Sticks
    Complete Step By Step Instructions

  • Adhesive Industrial Kit

    AT-65100 Adhesively Bonded Fastener Kit

    The AT-65100 Adhesively Bonded Fastener Kit Has a Variety Of Weld Mount Parts Designed To Give The User The Chance To Try Our Weld Mount System At Low Cost. The Kit Comes With A Dispensing Gun And Mixing Tips For Installation Of Our Adhesively Bonded Fasteners. The Kit Contains Our AT-8040 No Slide Multi-Bonder Acrylic Adhesive Which Will Bond To Almost All Surfaces Except Low Energy Plastic Or Rubber And Will Hold Up Even Our Heaviest Parts On A Vertical Or Overhead Surface. The Adhesive Sets in 12 Minutes And Is Heat Resistant To 225 Degrees. The Adhesive Should Be Refrigerated and Has A Shelf Life Of 9 Months.

    This Kit Contains:

    1 pc. AT-8040 No Slide Multi-Bonder Adhesive
    1 pc. AT-300 Dispensing Gun
    5 pc. AT-850 Mixing Tips
    50pc. AT-5 White Tie Mount
    2 pc. AT-113B Large Footman’s Strap Mount
    4 Pc. ST125-1420-16SS Studs 0.75” Tall
    1 Plano Storage Box 11” x 7.25” x 2.75”
    Step By Step Instructions

  • Executive Assorted Fastening and Adhesive Kit

    AT-1001003 – Executive Adhesive Fastener Kit

    The AT-1001003 Executive Adhesive and Fastener Kit Contains A Large Selection Of All The Common Weld Mount Parts And Is An Ideal Kit For The Full Service Yard Or Custom Builder. The Kit Contains 1 Tube Of Our AT-8040 No Slide Multi-Bonder Acrylic Adhesive Which Will Bond To Almost All Surfaces Except Low Energy Plastic Or Rubber. AT-8040 Will Hold Even Our Heaviest Parts on a Vertical or Overhead Surface Without Fixturing. The Adhesive Sets in 12 Minutes And Is Heat Resistant To 225 Degrees. The Adhesive Should Be Refrigerated and Has A Shelf Life Of 9 Months.

    This Kit Contains:

    1 pc. AT-8040 No Slide Multi Bonder Acrylic Adhesive
    1 pc. AT-300 Dispensing Gun
    10 pc. AT-850 3.5” Mixing Tips For AT-8040 Adhesive
    100 pc. AT-5 Large White Cable Tie Mount
    50 pc. AT-3 Small White Cable Tie Mount
    4 pc. AT-113 Large Footman’s Strap
    4 pc. PS62-832-16SS 1.00” Long Panel Stud
    10 pc. ST125-1420-16SS 1.00” Long Stud With ¼ x 20 Threads 1.25” Base
    4 pc. ST125-1420-24SS 1.50” Long Stud With ¼ x 20 Threads 1.25” Base
    4 pc. ST125-1024-12SS 0.75” Long Stud With #10 x 24 Threads 1.25” Base
    4 pc. ST125-1024-24SS 1.50” Long Stud With #10 x 24 Threads 1.25” Base
    1pc Plano Storage Box 14” x 9” x 2.75”
    Step By Step Instructions

  • Industrial Adhesive and Fastening Kit

    AT-7001 Industrial Fastener Kit

    AT-7001 Industrial Fastener Kit Contains A Large Selection Of All The Common Weld Mount Parts And Is An Ideal Kit For Industrial Maintenance Shops. Supplied In A Heavy “Durham” Metal Box Which Is A Standard Rack Mounted System. The Kit Contains 1 Tube Of Our AT-8040 No Slide Multi Bonder Acrylic Adhesive Which Will Bond To Almost All Surfaces Except Low Energy Plastics And Rubber. AT-8040 Will Hold Even Our Heaviest Parts On An Overhead Or Vertical Surface Without Fixturing. The Adhesive Sets in 12 Minutes And Is Heat Resistant To 225 Degrees. The Adhesive Should Be Refrigerated and Has A Shelf Life Of 9 Months.

    This Kit Contains:

    1 pc. AT-8040 No Slide Multi-Bonder Adhesive With 12 Minute Kick
    10 pc. AT-850 3.5” Mixing Tips For AT-8040 Adhesive
    1 pc. AT-300 Adhesive Dispensing Gun
    30 pc. AT-3B Small Black Cable Tie Mount
    100 pc. AT-5B Large Black Cable Tie Mount
    25 pc. AT-5 Large White Cable Tie Mount
    25 pc. AT-7 Aluminum Base Swivel Wire Tie Mount
    25 pc. AT-9 Aluminum Wire Tie Mount
    2 pc. AT-113 Large Footman’s Strap White
    2 pc. AT-113B Large Footman’s Strap Black
    6 pc. ST125-1420-12SS 0.75” Long Stud With ¼ x 20 Threads 1.25” Base
    6 pc. ST125-1420-16SS 1.00” Long Stud With ¼ x 20 Threads 1.25” Base
    6 pc. ST125-1024-12SS 0.75” Long Stud With #10 x 24 Threads 1.25” Base
    6 pc. ST125-1024-20SS 1.25” Long Stud With #10 x 24 Threads 1.25” Base
    2 pc. SHC-1000 Single Hose Clamp 1.00”
    2 pc. DHC-1000 Double Hose Clamp 1.00”
    1 pc. Storage Box Durham Manufacturing 18.5’ x 12.5” x 3.25”
    Step By Step Instructions

Weld Mount Systems © 2009
^ Back to Top